|
Specification : The IPM40 Plasma Cutting Machine is design by using advance Inverter Technology. Its concept is using high power switching device -V-MOSFET to change 50 Hz/60Hz frequency to high frequency (100 KHz and above), follow by voltage step and rectification. By PWM (Pulse Width Modification) technique to control the output D.C. current, we can reduce the weight and size of the machine, improve the efficiency by 30% as well. Start arc system which using high frequency surge concept making start arc more easier. The efficiency of the machine can achive more than 85%. SPECIAL FEATURES - Stable
- Reliable
- Portable
- Energy Saver
- Low Noise
- Hugh Speed Cutting
- Clean cutting
- Performance
CUTS:- - Mild Steel
- Zinc coated Steel
- Stainless Steel
- Aluminium
- Brass
- Copper
TYPICAL USAGE:- - Tool / Die repair
- Maintenance
- Automative
- Fabrication
Technical Characteristics | | Inverter IPM 40 | Input Voltage | 1ph | 230V ± 15% | Output Voltage | V | 96 | Input Power | KVA | 6 | Duty Cycle | % | 60 | Current Adjust Range | A | 10 – 40 | No Load O.C.V | V | 230 | Efficiency | % | 85 | Power Factor | cosØ | 0.93 | Start Arc Method | - | Contact Start Arc | kW | - | 5.6 | ** Recommended Air Pressure | Bar / PSI | 5.0 – 5.5 (bar) / 72 – 80 (PSI) | Weight (without input cable & plug) | kg | 8 | Dimension (WxLxH) | mm | 155 X 440 X 310 |
*Please note that the specification may vary within each country. Specification are subjected to change without notice. **Cutting pressure must be maintained during cutting.  
|
